I recently added a new hard drive to my AMX INDY and installed XWINNMR2.5 on
it. I still have the old drive with XWINNMR2.0 on it and I can boot on
whichever drive I like. Both are under IRIX6.2.
I noticed that the exactly same dataset using selzg pulse program (see below)
gives under XWINNMR2.5 a CPR error: "ILLEGAL command tpoal1", when executing
the as command, but behaves OK under XWINNMR2.0. The rga and zg commands
execute without complaint on either XWINNMRs.
Any ideas? Was this noticed on spectrometers other than AMX? I could not find
any referrence to tpoal1 in the online manual (Help, Menus, Acquire or Help,
Index).
Thanks,
George
-------------------------selzg--------------
1 ze
d12 tlo
2 d1
p11:tp1 ph1
go=2 ph31
wr #0
d12 thi
exit
ph1=(360) 0 180 180 0 90 270 270 90
;ph1=(360) [0 180 180 0 90 270 270 90] + x
ph31=0 2 2 0 1 3 3 1
------------------------------------------------------------
-- -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* George M. Benedikt PhD Sr. R&D Associate live: (216)447-5448 BFGoodrich Co. fax: (216)447-5527 9921 Brecksville Rd. e-mail:benedikt@research.bfg.com Brecksville, Ohio 44141-3289 benedikt@apk.net (home) -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*