> I have just learned that xwinnmr 2.6 wants to see board ecls
> (engineering change level) above a certain number (varies for each board).
> I was never aware of this with previous versions of
> xwinnmr, and we have a couple of older avance machines here that appear to
> need a number of boards updated in order to use xwinnmr 2.6 (at a cost of
> $1000's). Is there anyone out there who is using xwinnmr 2.6 on avance
> machines that were delivered during or prior to 1995? I am hoping that
> maybe it works fine without the upgrades, but would like to check for
> evidence. I will pass on any information I gather.
We have designed XWIN-NMR2.6 to work with optimum performance with the
hardware components indicated in the release letter. Of course, older
hardware from older instruments might also work, but we cannot guarentee
that all possible combinations will perform equally well. In such a case,
if you want to take full advantage of the new features that are part of
the new XWIN-NMR2.6 release, is will be necessary to upgrade certain
boards to certain EC levels. We provide these updates with attractive
exchange prices (not full prices !). And it updates your system to the
latest available level.
With best regards, Mike Engelhardt !
!!!!!! Please note the new address and phone number !!!!!!
===================================================================
... ... Dr. Michael Engelhardt
. * . . Software Department
. . . . Bruker Analytik GmbH
B R U K E R Silberstreifen
. . . . D-76287 Rheinstetten
. . . . Voice: +49-721-5161-440
... ... Fax: +49-721-5161-480
Email: michael.engelhardt@bruker.de
===================================================================