I have the following CSI for sale:
Oxford 2T 45cm very stable magnet with emergency unit and all cabling.
Actively shielded Gradient system (B-GA26) 0.5 mT/m/A
RT shim set (B-S26)
3 channel 160V/60A Copley 231.
SGI Indy 5.3, 256 MB Ram 4 & 2 GB system disk, SCSI-II interface. ParaVision 2.01, Xwin NMR 2.0, 21” Monitor.
Aspect X32 acquisition processor; 32 bit CPU/4 with floating point coprocessor, Ethernet interface 6 RS-232 channels and 16 MB Memory
Acquisition controller with 32 bit microprocessor chip set, 4k prom with bootstrap, test and debugging programs.
System processor controller, 4K memory for programming steps, duration’s( constant or variable). Looping, branching and subroutines, jump commands & pulse lists, 7 external lines, 16 loop counters, shortest timing interval 200 ns, slave timer, 2K independent duration’s can be programmed to provide pulses for an unlimited number of channels.
Gradient wave forms generated by Intel 960 with 5 µs/point/16 bit resolution.
16 and bit 125 kHz ADC.
12 bit BC-132 ADC (2x5 mHz/2 x 64K).
PTS 620 synthesizer (2 – 250 MHz in 1 Hz steps).
1 kW Linear amplifier (10 – 90 MHz) (AMT –3446).
Preamplifier C13, N14, Na23, H2, P31, and H1/F19.
Kodak color ease PS printer.
72 mm RF Birdcage coil (Bruker).
250 mm RF Quad coil (Morris Instruments).
Gradient cooling system.
Spares, breakout boxes, all manuals, Bruker load center and power transformer, Rf and data cabinets and all cabling.
Contact:
jlewis2@compuserve.com
This archive was generated by hypermail 2b29 : Sun Dec 31 2000 - 01:15:03 PST