internal gradient functino error

From: Srinivasan Shekar <ss4481@nyu.edu>
Date: Sun May 16 2010 - 13:19:16 EDT

Hi,

on an AV500 bruker (mainly liquids spectrometer), i'm having problems
w/ a pulse program attempting to use gradients.  I've checked the
manual and made sure that there is nothing amiss as far as following
the manual.

Following statements give the error:   "gradient file r1d not found" when
"ased" command is issued.   (but similar constructs w/ "r2d" and "r3d" are
fine; and according to the manual all three --- r1d, r2d and r3d --- are
valid).
================================================
lgrad r1d<1d> = l1
...
  50u UNBLKGRAD
...
1 5m
2  5m
... 
  100u            grad{ (0)+r1d(cnst1) | (0)            | (0) }
...
  100u            grad{ (0)            | (0)            | (0) }
...
   go=1 ph31
   d11 wr #0 if #0 zd
   5m igrad r1d
  lo to 2 times l1
  5m zgrad r1d
==================================================

any insights would be greatly appreciated.

-scs

Received on Sun May 16 13:19:16 2010